Distributed Antenna System (DAS) Dragonskin 2-HR Offering

Summary: Distributed Antenna System (DAS) Dragonskin 2-HR Offering

Distributed Antenna System (DAS) – Dragonskin 2‑HR Offering

Windy City Wire manufactures SmartWire low‑voltage DAS cable and accessories engineered for demanding commercial and industrial in‑building wireless applications. Our Dragonskin 2‑HR offering supports projects that specify two‑hour survivability for public safety DAS and cellular coverage enhancement, helping integrators standardize on a reliable, easy‑to‑install coax platform from a single B2B partner. With U.S. manufacturing, dedicated DAS accessory options, and consistent product availability, we provide the products and solutions you need to keep schedules on track and total installed cost under control.

Why choose Windy City Wire for DAS coax and accessories

• Built for DAS performance: Corrugated aluminum shielded, 1/2 in class coax constructions deliver stable RF performance across long runs, supporting consistent signal distribution in large buildings and campuses.
• Two‑hour survivability applications: The Dragonskin 2‑HR cable line is designed for projects that require a two‑hour pathway, aligning with typical public safety DAS specifications where survivability is called out.
• Field‑ready ecosystem: Matched N‑type connectors, heat‑shrink, and a dedicated trim tool streamline terminations on 1/2 in LCF12‑50 and ICA12‑50 series cable, promoting consistent results and fewer call‑backs.
• Jobsite clarity: A red jacket provides immediate path identification for public safety and DAS risers, aiding coordination with other trades and inspections.
• Reliable supply for DAS projects: Standardized 1000 ft reels and contractor‑friendly pack options for connectors simplify estimating, staging, and replenishment across multi‑site rollouts.

How this delivers value on your next DAS project

• Fewer variables, faster closeout: Sourcing cable and terminations together reduces spec risk, supports predictable RF performance, and shortens installation time.
• Lower labor impact: SmartWire Glide lubrication and matched accessories help reduce pull tension, speed prep, and enhance connector consistency.
• Standardization at scale: A consistent red‑jacket, 1/2 in corrugated aluminum DAS platform is easy to document, stock, and train across teams and subcontractors.
• U.S. manufacturing and support: Work directly with a manufacturer focused on low‑voltage wire and DAS needs for commercial and industrial environments.

Available constructions and accessories

• 1/2 in Dragonskin 2‑HR DAS Coax (Corrugated Aluminum, Red Jacket) – Designed to support two‑hour survivability projects; supplied on 1000 ft reels for uninterrupted long runs.
• N‑Type Male Connector for 1/2 in LCF12‑50 and ICA12‑50 series – Precision‑fit termination for consistent RF performance; available in contractor packs to streamline stocking.
• N‑Type Female Connector for 1/2 in LCF12‑50 and ICA12‑50 series – Rugged DAS termination to pair with male jumpers and equipment ports; available in bulk pack quantities.
• Heat‑shrink tube (one required per connector) – Provides added environmental protection and strain relief at each termination.
• Trim Tool for D01/E01 connector prep – Speeds and standardizes jacket and shield preparation for reliable, repeatable connector installs.

Ready to specify or quote?

Partner with Windy City Wire for a complete DAS coax and accessory solution that supports two‑hour survivability requirements, streamlines installation, and delivers consistent results across commercial and industrial facilities. Contact our team to review your bill of materials, confirm connector compatibility for 1/2 in LCF12‑50 and ICA12‑50 series cable, and secure product for your upcoming rollout.

Solutions: Distributed Antenna System (DAS) Dragonskin 2-HR Offering

Distributed Antenna System (DAS) Dragonskin 2‑HR Offering

Windy City Wire supports in‑building wireless projects that require reliable, code‑driven performance with our DAS Dragonskin 2‑HR offering. Designed for mission‑critical public safety radio and high‑density cellular coverage, these solutions help integrators, electrical contractors, and RF engineers build consistent, high‑performance feeder and riser paths from head‑end equipment to remote units, splitters/tappers, and antennas. The portfolio centers on 1/2-inch corrugated aluminum coaxial constructions with a highly visible red jacket for easy identification of public safety pathways and clear separation from non‑life‑safety cabling on the job site.

Where DAS Dragonskin 2‑HR products are used

• Public Safety DAS (ERRCS/BDA) – For first responder radio coverage in buildings where two‑hour circuit survivability is specified by the AHJ. Typical for VHF, UHF, 700/800 MHz LMR systems, including fire, police, and EMS communications.
• Cellular/Commercial DAS – Single‑carrier and carrier‑neutral systems delivering consistent voice/data performance for LTE and 5G inside complex structures.
• Private Wireless Networks – Private LTE and CBRS deployments in facilities that require dedicated, secure wireless capacity for operational technologies.
• In‑building Repeaters and BDAs – Feeder runs between donor antennas, head‑end amplification, remotes, splitters/tappers, and service antennas.
• Tunnel and Transit Corridors – Feeds and transitions to radiating cable segments to extend coverage in long corridors and subterranean environments.

Industries and environments

• Healthcare facilities, life‑safety critical buildings, and high‑rise residential/commercial towers
• Airports, stadiums, arenas, and convention centers
• University and corporate campuses, data centers, and colocation sites
• Manufacturing, logistics centers, and cold‑storage/warehouse environments
• Hospitality, retail, and mixed‑use developments
• Government, justice, and public administration buildings
• Transportation hubs, tunnels, and large parking structures

Construction highlights and accessories

• Corrugated aluminum shield – Robust, low‑loss feeder construction provides stable electrical performance across the wide frequency ranges used in public safety and cellular DAS. The corrugated design supports durable routing through risers and equipment rooms.
• Red jacket – Aids visual identification of life‑safety pathways to support installation best practices and separation from non‑critical services.
• N‑type connectors for 1/2-inch LCF12‑50 and ICA12‑50 series – Available in both N(M) and N(F) configurations to match system hardware, jumpers, and test gear. These are standard interfaces for many BDAs, remotes, and passive components.
• Contractor‑friendly packs – Connector options are offered in practical pack sizes (e.g., 10‑pack and 20‑pack), helping crews stage terminations and reduce trips for replenishment.
• Heat‑shrink per termination – One heat‑shrink tube is used per connector to bolster environmental sealing and strain relief where specified.
• Trim/prep tool availability – A dedicated trim tool for D01/E01‑style connectors promotes consistent strip lengths, proper dielectric preparation, and repeatable results across crews and shifts.

Typical system integrations

• Head‑end and donor paths – Connect BDAs/bi‑directional amplifiers to donor antennas and points of interface with carriers or public safety radio systems.
• Remote distribution – Serve remotes, passive DAS components (splitters, directional couplers, tappers), and service antennas throughout risers and horizontal pathways.
• Transition to radiating cable – Feed radiating (leaky feeder) segments in tunnels or long corridors where conventional antennas are impractical.
• Monitoring and testing – N‑type interfaces simplify sweeps, PIM testing, and ongoing maintenance with common field instruments and adapters.

Project advantages for contractors and RF designers

• Performance consistency – Stable attenuation and impedance characteristics support predictable link budgets and simplify design documentation.
• Jobsite clarity – Red jacket coloration helps teams identify public‑safety‑related pathways fast, improving coordination with electrical, fire alarm, and low‑voltage trades.
• Connector ecosystem – N(M) and N(F) options align with common DAS hardware, reducing the need for adapters and minimizing mismatch points.
• Workmanship support – Heat‑shrink and purpose‑built trim tools help ensure terminations meet specification and reduce rework.

Best‑practice installation notes

• Maintain manufacturer‑recommended bend radius and pulling tension to preserve electrical performance.
• Torque N‑type connectors to specification and verify center conductor and shield preparation using the designated trim tool.
• Plan pathways to minimize unnecessary connectors and transitions; fewer junctions often yield better system performance.
• Coordinate with AHJ requirements for fire‑resistive pathways and cable survivability in public safety applications.
• Document test results (sweeps and, where required, PIM) to streamline commissioning and closeout.

Partner with Windy City Wire

Our team supports take‑offs, BOM development, and product selection for public safety and cellular DAS projects. Whether you are feeding remote units across multiple riser shafts or building head‑end donor paths, we can help align cable constructions, connectors, and field tools with your design and installation requirements.

Contact us to review your drawings, frequency bands, and AHJ requirements so we can recommend a complete DAS cabling and accessory set that fits your schedule and scope.

Frequently Asked Questions: Distributed Antenna System (DAS) Dragonskin 2-HR Offering

• What constructions are available with this Dragonskin 2-HR cable?
  Corrugated aluminum shielded 1/2-inch coaxial construction with a red jacket, designed for Dragonskin 2-hour survivability applications.
• What other colors is this Dragonskin 2-HR cable available in?
  This offering is only available in Red.
• Do you stock 1/2" Coax DAS Cable?
  Yes, we stock 1/2" coax for all survivability requirements.
• Who are Windy City Wire's valued partners in the DAS market?
  Windy City Wire is proud to partner with companies like RFS, ADRF, Westell, iBwave, GWave, RFI and others. Additional partner information can be found at https://windycitywire.com/resource-cetner/das
• Can DAS cables be RackPacked?
  No, DAS cables cannot be RackPacked as these spools of cable are large and not conducive to being used with the SmartWire RackPack solution.
• Do the DAS cables work with the RackPack Transportation devices?
  No, the spools are much larger than the RackPack boxes.

Additional Links:

• DAS ROM/BOM Request Form
• Check out our DAS Resource Section
• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you